Senyd automation
HOME >> Products >> M18 DC 3wire through beam photoelectric sensor
ST300 series with analog output
ST500 series with analog output
▶single or dual axis optional

▶Range：Dual axis 0～±90°optional

                  Single 0-±180°（0-360°）optional

▶Output0-20mA,4-20mA, 0-10v,0-5v,0.5-4.5v optional

▶Power supply  9~36V

▶Accuracy 0.2º

▶Shock and vibration resistance

▶Working temperature:-30～+70℃

▶P67 （IP68 customizable）

▶Dimensions(70*40*40mm)（customizable）

▶Dual-axis inclinometer measurement

▶Measuring range: ±90°

▶Output interface: 0-5V/0-10V/4-20mA/0-20mA/0.5-4.5V

▶Wide voltage input: 12~35V

▶Product size: L90mm×W40mm×H27mm

▶Highlyanti-vibration performance>3500g

▶High resolution: 0.01°

▶Accuracy: 0.1° 

▶Wide temperature operation-40～+85℃

▶IP67 protection

X,Y,Z ,three-axis 

MEMS gyroscope 

Tilt switch

with Relay output voltage output RS232 interface

▶Angle of yaw:  ±180°（360°optional）
▶Resolution:  0.01°
▶Power supply：DC 9~36V

▶Temperature drift：< ±0.1°/sec/℃

▶Anti vibration

▶Output 0~5V/0-10V/4~20mA/0-20mA

▶Wide temperature -40～+85℃

▶Dimensions (60*59*29mm)

▶Dual axis inclination monitoring (0~± 90 °)
▶The alarm threshold can be set by the user (default 5 degrees)
▶Relay output (normally open and normally closed), optional switch quantity (voltage)
▶Wide voltage input DC9-36V
▶Relative/absolute zero point setting
▶Withstand interference, impact, and vibration
▶Accuracy 0.2 º
▶Wide temperature operation -40~+85 ℃
Inertial navigation
Fiber Optic gyroscope