Senyd automation
HOME >> XDS100 series pressure switch without display
XDS100 series pressure switch without display

XDS100 series pressure switch without display

The XDS100 series pressure switch for general purpose is the ideal solution for general industrial

applications.  

These measuring ranges can be combined in almost any way with relay output signal. When the pressure is higher than the alarm pressure point (at the case of high alarm), the LED turns on, and NO port is connected to COM port, NC port is isolated from COM port; and this situation will be kept, till the pressure is lower than the release pressure point.  

Furthermore, it offers three options for the accuracy 0.5 % F.S, 0.25% and 1 %F.S. 

All variants described in this data sheet are available on very short lead times. For particularly urgent demands, there is a sizeable stock available. 


0.00
0.00
  
Product Description

The XDS100 series pressure switch for general purpose is the ideal solution for general industrial

applications.  

These measuring ranges can be combined in almost any way with relay output signal. When the pressure is higher than the alarm pressure point (at the case of high alarm), the LED turns on, and NO port is connected to COM port, NC port is isolated from COM port; and this situation will be kept, till the pressure is lower than the release pressure point.  

Furthermore, it offers three options for the accuracy 0.5 % F.S, 0.25% and 1 %F.S. 

All variants described in this data sheet are available on very short lead times. For particularly urgent demands, there is a sizeable stock available. 


●SS304 Shell and Pressure Connector

●Relay Output

●Over-voltage protected

●Reverse voltage protected

● Alarm Pressure can be Adjusted from 0 to Full

●IP65

● Air measurement and control